Cartridge Cutaway

• 20mm cartridge tubes are bored and honed to ".0005".
• 12.5mm cartridge rods are centerless ground to ".0005".
• Unique bearing design virtually eliminates stiction and stops fluid bleed past the bearing.
• Dramatically improved low speed damping and decreased damping response time.
• All components are hard-coat anodized to prevent oxidation and wear contamination of the fork fluid.
• The AK-20 kit is modular in construction, and can be retrofitted to almost any future bike you may own.
• Rebound and compression valving is derived from our race proven Axxion Valves.
• Most applications have internal top out spring design for reduced weight.

No other suspension unit is held to these exacting standards.